Konica Minolta All models error codes
Codes
- 1Error codeToner cartridge rack 15
- 2Error codeToner cartridge 16
- 004CError codeOzone Fan Motor Failure
- 004EError codePower Supply Cooling Fan Motor Failure
- 0010Error codePU Drive Motor C/M/Y Failure
- 10Error codeOil coating roller 24
- 11Error codeFusing belt 25
- 12Error codePaper exit sensor 26
- 13Error codeDetects the surface temperature of the heat roller
- 13CError codeNew Transfer Belt Unit Resetting Failure
- 13DError codeEEPROM Failure (Main Unit)
- 13EError codeFlash ROM Write Failure
- 14Error codeOperates to turn the heater lamp off if the temperature of the heat roller is abnormally high
- 15Error codeCleaning blade
- 16Error codeWaste toner collection blade
- 0017Error codePU Drive Motor Bk Failure
- 0040Error codeSuction Fan Motor Failure
- 0060Error codeThe Fire Check Detection Signal is detected as H while the motor is rotating
- 0094Error codeThe 2nd Image Transfer Pressure/Retraction Sensor is not activated after the 2nd Image Transfer Roller retracts
- 0096Error codeThe 1st Image Transfer Pressure/Retraction Sensor is not activated after the 1st Image Transfer Roller retracts
- 100Error codeM3-5
- 101Error codeM3-7
- 102Error codeM3-6
- 103Error codeM3-4
- 104Error codeM5-5
- 105Error codeM4-29
- 106Error codeM1-1
- 107Error codeM3-1
- 108Error codeM3-8
- 109Error codeM5-12
- 127Error codeM4-11
- 133Error codeM5-2
- 140Error codeM6-5
- 141Error codeM6-4
- 142Error codeM6-1
- 143Error codeM6-6
- 203Error codeM4-19
- 204Error codeM5-3
- 205Error codeM4-10
- 207Error codeM1-6
- 209Error codeM5-10
- 0250Error codeWhen the Power supply alarm is continuously detected after the lapse of a predetermined period of time while the 24V remote is ON and the Hard Alarm is OFF
- 0300Error code• After the Polygon Motor is started, the Spindle Alarm Signal (SPALM) is not cancelled even after a predetermined period of time has lapsed. • The Spindle Alarm Signal is detected for longer than a predetermined period of time during regular rotation of the Polygon Motor
- 0310Error codeLASER ERROR
- 0500Error codeFUSER ERROR 0500
- 0501Error codeFUSER ERROR 0501
- 0510Error codeFUSER ERROR 0510
- 0511Error codeFUSER ERROR 0511
- 0520Error codeFUSER ERROR 0520
- 0521Error codeFUSER ERROR 0521