Juniper All models error codes
Codes
- P0653Error codeSensors reference voltage too high; Defective ECU
- P0698Error codeSensors reference voltage too low; Defective ECU or over-load
- P0699Error codeSensors reference voltage too high; Defective ECU
- P1001Error codeFuel shutoff valve 2 failure, disconnected or shorted to ground; Broken wirings, defective solenoid or defective ECU
- P1002Error codeFuel shutoff valve 3 failure, disconnected or shorted to ground; Broken wirings, defective solenoid or defective ECU
- P1101Error codeManifold absolute pressure lower than expected
- P1102Error codeManifold absolute pressure higher than expected
- P2100Error codeDBW A or DBW B open load. Broken _ _ wirings or defective ECU
- P2102Error codeDBW A or DBW B outputs are _ _ shorted to ground. Broken wirings or defective ECU
- P2103Error codeDBW A or DBW B outputs are _ _ shorted to battery voltage. Broken wirings or defective ECU
- P2122Error codeFoot-pedal position sensor 1 disconnected, shorted to GND or open circuit ; Broken wirings or defective pedal assy
- P2123Error codeFoot-pedal position sensor 1 failure or shorted to power ; Broken wirings or defective pedal assy
- P2127Error codeFoot-pedal position sensor 2 disconnected, shorted to GND or open circuit ; Broken wirings or defective pedal assy
- P2128Error codeFoot-pedal position sensor 2 failure or shorted to power; Broken wirings or defective pedal assy
- P2135Error codeThrottle Position Sensors out of track; Defective electronic throttle body. TPS sensors voltages differ more than expected
- P2138Error codeFoot-pedal position sensors out of track ; Intermittent connections or defective pedal assy
- P2195Error codePre-cat O sensor too lean for too long 2 time (60 secs as per EPA)
- P2196Error codePre-cat O sensor too rich for too long 2 time (60 secs as per EPA)
- P2228Error codeBarometric pressure sensor disconnected, shorted to GND or open circuit; Broken wirings or defective sensor
- P2229Error codeBroken wirings or defective sensor