Hyundai CE All models error codes
Codes
- 3AError codewater leakage sensor No. 1 is faulty
- 3CError codedew condensation sensor defective
- 3HError codewater leakage sensor No. 2 is faulty
- 6FError codethe simplified control panel is faulty
- 60-100Error codeAlarm fasılalı olarak çalar
- 60-120Error codeAlarm fasılalı olarak çalar
- A1Error codethe printed circuit board of the indoor unit is faulty
- A2Error codefan motor blocked
- A4Error codedefective heat exchanger
- A5Error codeoverheating of the heat exchanger
- A6Error codefan motor overloaded
- A7Error codeblind drive defective
- A8Error codecurrent overload (general)
- A9Error codeelectronic expansion valve defective
- AAError codeheater overheated
- AHError codepump blocked
- C0Error codegeneral sensor malfunction
- C3Error codethe drainage level sensor is faulty
- C4Error codeheat exchanger temperature sensor 1 defective
- C5Error codeheat exchanger temperature sensor 2 defective
- C6Error codethe fan motor is overloaded, the sensor is blocked
- C7Error codeblind drive sensor is out of order
- CCError codebreakage of the humidity sensor
- CEError codedamage to the radiation sensor
- CFError codehigh pressure sensor out of order
- CHError codethe pollution sensor is working
- CJError codethe temperature sensor on the remote control does not work
- cm2Error codeFriction plate is faulty. Travel motor is defective. Brake valve is faulty
- CN-52Error codeDefective united MCU Defective travel pressure sensor Short circuit or poor connection between CN-51 (32)-CD-6 (A) and / or CN-51 (31)- CD-6 (C) (fault code 108 displayed) Defective work pressure sensor Short circuit or poor connection between CN-51 (32)-CD-7 (A) and / or CN-51 (31)- CD-7 (C) (fault code 105 displayed)
- CN-54Error codeClogged air filter or defective switch Short circuit in wiring harness between CD-10A- CN-54 (13) Defective united MCU
- CN-56AError codeCause Defective cluster Disconnection in wiring harness o poor contact between CN-5-CN-56A Disconnection in wiring harness o poor contact between CN-5 (9 -GND or fuse No 9, 16
- CN-141Error codeCause Defective wiper
- CN-510Error codeShort circuit or poor connection between CN-505 (25)-CN- 509 (1) or CN-505 (101)-CN-509 (2) or CN-505 (25)-CN- 510 (1) or CN-505 (100)-CN-510 (2) Defective EPPR valve
- E1Error codethe printed circuit board of the outdoor unit is faulty
- E3Error codeHPS (high pressure sensor) is working
- E4Error codeLPS (low pressure sensor) is working
- E5Error codethe compressor motor is overloaded, the overheating relay has tripped
- E6Error codecompressor motor blocked by overcurrent
- E7Error codefan motor blocked by overcurrent
- E8Error codecurrent overload (general)
- E9Error codeelectronic expansion valve defective
- ECError codepeak water temperature
- F3Error codeabnormally high temperature of the discharge pipe
- F6Error codeunacceptable temperature in the heat exchanger
- FAError codeunacceptable charge air pressure
- FCError codeunacceptable intake air pressure
- FEError codeinvalid oil pressure
- FHError codeoil overheating
- H0Error codegeneral sensor malfunction
- h2Error codeair temperature sensor defective