Extreme Networks switch ağ anahtarı All models error codes
Codes
- cl74Error codeEnables/disables IEEE Forward Error Correction (FEC) Clause 74 or 91 modes
- EEE802Error codeAn ExtremeXOS process running on the master node should continuously send the MEP state changes to the backup. Replicating the protocol packets from an master node to a backup may be a huge overhead if CCMs are to be initiated/ received in the CPU and if the CCM interval is in the order of milliseconds. RMEP timeout does not occur on a remote node during the hitless failover. RMEP expiry time on the new master node in case of double failures, when the RMEP expiry timer is already in progress, is as follows: RMEP Expiry Time = elapsed expiry time on the master node + 3.5 * ccmIntervaltime + master node convergence time
- eui64Error codeCopies a file from the specified flie system or relative to the current working directory to another file on the specified file system or relative to the current working directory
- l2Error codeModify the current profile that removes all L2 rules. L2 ether rules are accounted for in the first available space from IPv4, IPv6, or MAC group
- V40Error codeSelects the switch ports and speed for stack communications
- V300HError codeV300 Series 8 port 10/100/1000BASE-T POE+ ports half/ full duplex, 2 × SFP+ ports, fanless, high-temperature model