Error code

Value flanş açma takımı All models code L1000

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: brakes

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Located on the top right corner of the smart rise SRU. o Verify the correct wiring to the drive. It is on page 4 of your prints. Spd Command Src, Run Command Src, Fault o Reset Src, Brake Pick Src, and Brake Hold Src are all set to SERIAL. o Go to the C1 menu on the Magnetek drive and verify that serial mode is set to MODE1 o Replace Cat 5 cable going from the MR board to the drive. o Re-program the CT/COP board as the MR and vice versa. o If the fault continues there is a problem with the drives communication board.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.