SolarEdge All models error codes
Codes
- 1-4Error code8x66 - 8x69 8x6A - 8x6F
- 1xError codeThe system detected DC electricity possibly leaking to ground, a safety fault. (moisture in a connector, damaged insulation, rodent damage, or a failing panel)
- 2Error codeHub page covering all SolarEdge SE series inverter fault codes and their diagnostic paths.low
- 2xError codeThe inverter reported an internal hardware or self-test failure. (a failed internal circuit or component)
- 2x0AError codeGround fault Ground fault - newer models
- 2x11Error codeOver temperatureNewer residential inverters
- 03XError codeThe inverter cannot communicate with the SolarEdge monitoring server, or there is a communication fault between the inverter and its power optimizers.moderate
- 3XError codeThe inverter has disconnected from the grid as required by safety and utility interconnect standards.moderate
- 8xError codeGrid voltage from the utility is above the safe range, so the inverter stops to protect itself. (utility voltage running high on your street, common midday)
- 10Error codeA cooling fan inside a larger SolarEdge inverter stopped, which can cause overheating and reduced output. (a worn-out or jammed cooling fan)
- 18xError codeThe inverter got too hot and reduced output or shut down to protect its electronics. (a hot day, direct sun on the inverter, or blocked airflow)
- 24Error codeRapid Shutdown hardware error. Contact SolarEdge support
- 96Error codeContact SolarEdge support
- 98Error codeContact SolarEdge support
- 185Error codeClean or replace the fan
- 199Error code
- age850Error codeTemp 156 F
- HDError codeWave capacitor failures (18xB5, 18xB7): Affects 2017-Q2 2018 models, requires warranty replacement
- N/AError codeN/A
- v3Error codeCPU v3.18xx and before