Siemens Healthineers BT cihazı All models error codes
Codes
- AV4Error codeMotor Speed
- AV5Error codeMotor Current
- AV6Error codeMotor Voltage
- AV7Error codeMotor Torque
- AV8Error codeMotor Temperature
- AV9Error codeMotor Shaft Power
- AV14Error codeDC Link Voltage
- AV15Error codeHeatsink Temperature
- AV16Error codeActive Fault Code
- AV17Error codeMost recent fault
- AV18Error codeSecond most recent fault
- AV19Error codeThird most recent fault
- AV44Error codeCurrent Limit
- AV45Error codeMotor Nominal Current
- AV46Error codeMotor Nominal Power
- AV47Error codeMotor Nominal Speed
- AV48Error codeMotor Nominal Voltage
- AV49Error codeMotor Nominal Frequency
- AV50Error codeMotor COSPHI
- B2Error codeCommand to reset fault
- B3Error codeIndicates if a fault is active
- B4Error codeIndicates if an alarm is active
- B6Error codeMotor running at zero speed
- B7Error codeMotor is magnetized
- BT300Error codeP1.18 Multi-Pump Wizard
- BV4Error codeStatus of Fault, regardless of the control source
- BV5Error codeStatus of Alarm, regardless of the control source
- BV6Error codeMotor is running at Zero speed
- BV7Error codeMotor is running at Setpoint
- enc20Error code0Ou.t0pu0t F Hreqz 0.00Hz
- M1Error codeP1.17 PID Mini-Wizard
- M2Error codeM2.6 Multi-Pump
- M3Error codeM3.1 Motor Settings
- M4Error codeDisplay of currently active faults 1 and 2
- M5Error codeConfiguration and status of the fan and sine filter
- P1Error codeDefines nominal motor voltage from motor nameplate data. Also see Menu Structure P3.1.1.1
- P3Error codeRun Interlock Proof
- P4Error codeParameter to acknowledge/reset a fault
- P5Error codeFan Lifetime Reset
- V2Error codeOutput frequency to motor