Error code
Penta lazer kesim makinesi All models code for72
For your safety
This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.
Hazard area: mains voltage
Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.
The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.
No approved translation for this record yet; showing the original text.
Meaning
Verify ground wire is connected on both incoming voltage side and motor side of Intellidrive. Ungrounded Intellidrive, with ground detection With the power disconnected, use an ohmmeter to verify which pipe the Warning LED flashing parameter disabled (will operate for 72 hours Intellidrive’s transducer is connected to. Also verify that the input ground and then fault). wire is at the same potential, e.g., has approximately the same ohm reading. Verify the input ground is connected all the way back to electrical panel
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberSolution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Address of this page: https://www.remfixit.com/tr/pentalazerkesimmakinesi/tum-modeller/for72