Omron endüstriyel All models error codes
Codes
- 1-2Error code1 Types of Fatal Errors
- 1-3Error code1 Types of Non-fatal Errors
- 2-1Error code3 Flowchart to Check Error Status on EtherNet/IP Function Module
- 2-3Error code1 Identifying and Resetting Errors with the Sysmac Studio
- 3-1Error code1 Interpreting Error Table
- 3-2Error code1 Error Tables
- 3-3Error code2 Error Descriptions
- 3-4Error code2 Error Descriptions
- 12-2Error code2 Troubleshooting the Main Errors in the Safety I/O Units
- 12-3Error code2 Types of Errors
- 12-4Error code1 Troubleshooting the CIP Safety Target Device Errors
- D0Error codeThis range of error codes is to be used to indicate object class-spe- cific errors. This code range is used only when none of the error co- des in this table accurately reflect the error that occurred. The addi- tional code field is used to describe the general error code in more detail
- D00Error codeSafety programs operating with no errors. All safety master connections estab- lished
- D02Error codeNo event with a level of minor fault or high- er currently exists for the safety programs
- D06Error codeNo error in the en- tire CIP Safety Tar- get connections
- FZ5Error codeThe functions, settings, and communications methods to communicate with FH/FZ5 -series Vi- sion Systems from a PLC or other external device are described
- G5Error codeDescribes the hardware, setup methods and functions of the AC Servomotors/Servo Drives with built-in EtherCAT Communications. The Linear Motor Type models and dedicated models for position control are available in G5- series
- MX2ParameterDescribes the following information for the 3G3AX-MX2-ECT and 3G3AX-RX-ECT EtherCAT Communications Unit for MX2/RX-series Inver- ters: installation, parameter settings required for operation, troubleshooting, and inspection meth- ods
- NX1PError codeProgramming error processing
- NX102Error codeIf the error persists even after you make the above corrections, replace the Power Supply Unit
- So00Error codeGives the status of safety output termi- nal 00. 0: Error 1: No error
- So01Error codeGives the status of safety output termi- nal 01. 0: Error 1: No error
- So02Error codeGives the status of safety output termi- nal 02. 0: Error 1: No error
- to2Error code• Emergency stop pushbutton • Single beam safety sensor
- to4Error codeError attributes