NSK All models error codes
Codes
- 0-6Error codeNational Radio Research Agency Korea Communications Commission Republic of Korea
- 4-5Error codeSound Volume (When the load exceeds the set torque limit value, Error etc.)
- 90Error codeThis can result in failures
- age09Error code
- age13Error code
- C2Error codeVelocity Control Error
- C3Error codeVelocity Feedback Error
- C5Error codeModel tracking vibration suppression control error
- C9811Error codeNational Radio Research Agency Korea Communications Commission Republic of Korea
- D2Error codeFaulty Position Command Pulse Frequency 1
- D3Error codeFaulty Position Command Pulse Frequency 2
- E0Error codeThe motor shaft is locked
- E1Error codeDetected over current in the circuit
- E2Error codeEEPROM Check Sum Error
- E3Error codeMemory Error 1
- E4Error codeMemory Error 2
- E5Error codeSystem Parameter Error 1
- E6Error codeSystem Parameter Error 2
- E7Error codeMotor Parameter Error
- E8Error codeAbnormalities in CPU circumference circuit
- E9Error codeSystem Code Error
- EEError codeMotor Parameter Automatic Setting Error 1
- F1Error codeTask Process Error
- HE0Error codeOverload or a risk of abnormal heating of the motor detected. <Motor overheat prevention function> *
- ing90Error codeThis can result in failures
- N001Error codeAlarm will be output and cannot operate the motor
- R43Error codeThis can result in failures
- SPR11Error codeClass B
- to55Error codeThis can result in burnout and failures
- to65Error codeThis can result in failures
- to360Error codeThis can result in failures