Parameter
Mitsubishi Electric All models code J41
No approved translation for this record yet; showing the original text.
Meaning
Jumper
Technical details
LED patterns and parameter values are shown only to technicians authorised for this branch.
View details as a technicianMember details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
• To operate each indoor unit by each remote controller when installed 2 indoor units or more are near, Pair No. setting is necessary. Pair No. setting is available with the 4 patterns (Setting patterns A to D.). Make setting for J41, J42 of indoor controller board and the Pair No. of wireless remote controller. • You may not set it when operating it by one remote controller. Setting for indoor unit Cut jumper wire J41, J42 on the indoor controller board according to the table below. Wireless remote controller pair number: Setting operation 1. Press the SET button (using a pointed implement). Check that the remote controller's display has stopped before continuing. MODEL SELECT flashes, and the model No. (3 digits) appears (steadily-lit). 2. Press the MINUTE button twice. The pair number appears flashing. 3. Press the temperature buttons to select the pair number to set. 4. Press the SET button (using a pointed implement). The set pair number is displayed (steadily-lit) for 3 seconds, then disappears. Indoor controller Pair No. of wireless Setting pattern jumper wire remote controller J41 J42 A - - 0 Initial setting B Cut - 1 - C - Cut 2 - D Cut Cut 3 - Pair No.4-9 of wireless remo
Solution
Solution steps are available to members and are not shown on this page. Answer the questions to open the solution.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/tum-modeller/j41/parametre