Error code
Mitsubishi Electric PWFY code 1102
No approved translation for this record yet; showing the original text.
Meaning
Abnormal discharge air temperature: 1) If a discharge temperature of 115 C [239 F] or higher is detected (first detection), units will stop, go into the 3-minute restart delay mode, and automatically restart after three minutes. 2) If a discharge temperature of 115 C [239 F ] or higher is detected again (second detection) within 30 minutes of the first stoppage of the units as described above, units will stop, go into the 3 minute restart delay mode, and automatically restart after three minutes. 3) If a discharge temperature of 1
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
(4) Thermistor failure (TH11) (5) Input circuit failure on the controller board thermistor (6) Shortage of circulating water (7) Clogged heat vent outlet
Solution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/pwfy/1102