Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric PURY code 7134

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Error due to other causes: An error code is displayed when this unit cannot be operated due to an error in other units or other causes. 3. An error code other than 7134 is occurring in other unit. Identify the unit and eliminate the causes of the error. If an error occurs during system startup, the error source unit may give priority to and display error code 7134.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Phenomena Even if the operation button on the remote controller is pressed, the display remains unlit and the unit does not start running. (Power indicator ( ) is unlit and no lines appear on the remote controller.) (2) Cause (1) The power is not supplied to the indoor unit. The main power of the indoor unit is not on. The connector on the indoor unit board has come off. The fuse on the indoor unit board has melted. Transformer failure and disconnected wire of the indoor unit. (2) Incorrect wiring for the MA remote controller Disconnected wire for the MA remote controller or disconnected line to the terminal block. (4) The length or the diameter of the wire for the MA remote controller are out of specification. (5) Short circuit of the wire for the remote display output of the outdoor unit or reversed polarity connection of the relay.

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.