Error code

Mitsubishi Electric PURY code 6810

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

UR communication error (UR: unit remote controller) The communication between the unit remote controller and the indoor unit does not work properly. (1) The address and the attribute for the remote controller are not displayed. [Detect by the unit remote controller] 1) An error is detected when the remote controller send "H", the unit remote controller detects "L" reception for the third time in the low. 2) An error is detected when the indoor unit sends no response for the demand of the "Monito

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Loose connection in the unit remote controller or the unit remote controller transmission line of the indoor (2) Decrease of transmission line voltage/signal by exceeding acceptable range of transmission wiring. (3) When the transmission data is changed due to the noise on the transmission line of the remote controller. (4) The transmitter-receiver circuit of the unit remote controller or the indoor unit remote controller failure

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.