Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric PUHY code 7130

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Incompatible unit combination: The check code will appear when the indoor units with different refrigerant systems are connected. 3. or R407C. Incorrect type of indoor units are Check whether the connecting adapter for connected. M-NET is not connected to the indoor unit.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

In the system ed to the female (4) Disconnected (5) Disconnected disconnected (1) When 2) and (3) Phenomena "HO" or "PLEASE WAIT" is pressed. ("HO" or "PLEASE (1) The power for the M-NET (2) Short-circuited transmission (3) Incorrect wiring of the ŒDisconnected wire for ŒThe indoor transmission ŒThe male power supply (CN40). In the system to which ed to the female power (4) Disconnected M-NET (5) Disconnected wire between disconnected connector. (6) Incorrect wiring for the ŒShort-circuited wire for ŒDisconnected wire for ŒReversed daisy-chain ŒIncorrect wiring for the ŒThe M-NET transmission (7) The sub/main setting (8) 2 or more main MA remote (9) Indoor unit board failure (10) Remote controller failure (11) Outdoor unit failure (Refer (2) Check method and remedy (1) When 2) and 3) above (1) Phenomena Even if the operation (Pow

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.