Error code

Mitsubishi Electric PUHY code 7101

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

For inverter-related error codes, refer to the following page(s). [8-9 Troubleshooting Inverter Problems] 7-6-20 Error Codes [4240, 4245, 4246] Overload protection (TNU): If the output current of "(Iac) >Imax (Arms)" or "THHS > TOL" is continuously detected for 10 minutes during inverter operation. Refer to the following page(s). [7-1 Error Code and Preliminary Error Code Lists] | incorrectly. supply due to improper

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) IPM contact failure (2) Air passage blockage (3) Power supply environment (4) Inverter, FAN board failure (5) Compressor failure (6) The model selection switches (SW5-3 - 5-8) on the outdoor (1) Grounding fault compressor (2) Inverter output related (1) Grounding fault of fan motor (2) Fan board failure (1) Short - circuited compressor (2) Output wiring (1) Short - circuited fan motor

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.