Error code
Mitsubishi Electric PQRY code 1113
No approved translation for this record yet; showing the original text.
Meaning
Liquid Low level detecting temperature sensor abnormality (TH3): Note: 1. Low press. saturation temperature trouble is not detected for 3 minutes after compressor start, and finish of defrosting operations, and during defrosting operations. 2. In the case of short/open of TH2~TH4 sensors before starting of compressor or within 10 minutes after starting of compressor, “1111,” “1112,” or “1113” is displayed too.
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
12)Clogging of indoor unit filter. 13)Fall in air volume caused by dust on indoor unit fan. 14)Dust on indoor unit heat exchanger. 15)Indoor unit block, Motor trouble. 9)~14) : Fall in low pressure caused by evaporating capacity in cooling-only cooling-principal operation. 17)Dust on outdoor heat exchanger. 18)Indoor unit fan block, motor trouble, and poor operations of fan controller. 15)~17) : Fall in low press. caused by lowered evaporating capa-city in heating-only heating-principal operation. 19)Poor operations of solenoid valve SV2. 20)Thermistor trouble (TH2~TH10). 21)Pressure sensor abnormality. 22)Control circuit board thermistor abnormality and pressure sensor input circuit abnormality. 23)Poor mounting of thermistor (TH2~TH10).
Solution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/pqry/1113