Error code

Mitsubishi Electric PQHY/PQRY code 4250

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

IPM error (Detail code 101): Overcurrent is detected by the overcurrent detection resistor (RSH) on the INV board. | Instantaneous overcurrent (Detail code 106) Overcurrent (Detail code 107): Refer to the relevant pages for the details of model names and the specified values. | Overcurrent error due to short-circuited motor (Detail code 105): When a short is detected on the load side just before starting the inverter operation.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Inverter output related (2) The model selection switches (SW5-3 - 5-8) on the Heat source unit are set incorrectly. (1) Grounding fault compressor (2) Inverter output related (1) Short - circuited compressor (2) Output wiring

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.