Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric PLA code P5

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Compressor and indoor fan will be turned off. 2 Drain pump is abnormal if the condition above is detected during suspensive abnormality. 3 Constantly detected during drain pump operation | Drain pump lock protection operation Error postponement, if drain pump stops 1 for 5 seconds continuously while drain pump is operating. Drain pump is abnormal if above condi2 tion is repeated 4 times after error postponement is detected.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Malfunction of drain pump (2) Defective drain Clogged drain pump Clogged drain pipe (3) Defective drain float switch Jamming of the drain float switch or malfunction of moving parts causing the drain float switch to be detected under water (Switch On) (4) Defective indoor-controller board (2) Clogged drain pump (3) Contact failure of connector (4) Defective indoor controller board

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.