Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric PKA code PL

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

9-4. TROUBLESHOOTING Phenomena (1) LED2 on board is: Abnormal if the clock function controller cannot be operated (Error code: E2) Abnormal refrigerant circuit During Cooling, Drying, or Auto Cooling operation, the following conditions as failures when detected for 1 second. a) The compressor continues to more seconds. b) The liquid pipe temperature (TH2) condenser/evaporator temperature 75°C [167°F] or more. These detected errors will not until the power source is reset. OF indoor controller • When LED1 off. Power supply to outdoor Defective Powe

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

of remote normally. refrigerant pipes run for 30 or After the recovery Air into refrigerant piping the whole refrigerant or the Refer to "9-6-2. Abnormal operation (no rotation) (TH5) is indoor controller of indoor fan · Defective fan motor be cancelled · Defective indoor control board Check refrigerant Defective refrigerant circuit To avoid entry (clogging) refrigerant circuit abnormal high refrigerant circuit PROBLEMS Note: Refer to the outdoor unit's service manual for Cause Countermeasure on indoor controller board is also off. block (L1, L2). If no problems are found, indoor defective. on indoor controller board is lit.

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.