Error code

Mitsubishi Electric PFD code 7130

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Incompatible unit combination: The check code will appear when the indoor units with different refrigerant systems are connected. 3. (2) Incorrect type of indoor units are connected. - 167 - HWE1018A GB

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

In the system ed to the female (4) Disconnected (5) Disconnected disconnected (1) When 2) and (3) Phenomena "HO" stays minutes (1) The power (2) Short-circuited (3) Incorrect Disconnected The indoor The male (CN40). In the system ed to the (6) Incorrect Short-circuited Disconnected Reversed Incorrect The M-NET (7) The sub/main (8) 2 or more (9) Indoor unit (10) Remote (11) Outdoor (12) The outdoor (13) The indoor (1) When 2) (3) item see for controller, list self-diagnosis code. error displayed the to Normal Refer the (1) Compressor frequency does not rise sufficiently. (1) Inaccurate TH22 (Te) temperature reading Protection works and compressor frequency does not rise due to high discharge temperature Protection works and compressor frequency does not rise due to high pressure Pressure drops excessively. (4) Long piping

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.