Error code
Mitsubishi Electric PFD code 1112
No approved translation for this record yet; showing the original text.
Meaning
Liquid level trouble detecting temperature temperature sensor abnormality (TH4) saturation pressure Low: 3. When -40˚C or less temperature is detected 30 or more minutes after stop of outdoor unit, the stop is regarded as the first time and the process shown in 1. is observed. 4. 30 minutes after stop of outdoor unit is intermittent fault check period with LED displayed. Note: 1. Low press. saturation temperature trouble is not detected for 3 minutes after compressor start, and finish of defrosting operations, and
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
(6) Poor operations of ball valve. (8) Clogging of indoor unit filter. (9) Fall in air volume caused by dust on indoor unit fan. 10)Dust on indoor unit heat exchanger. 11)Indoor unit block, Motor trouble. 5)~10) : Fall in low pressure caused by evaporating capacity in cooling-only cooling-principal operation. 13)Dust on outdoor heat exchanger.
Solution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/pfd/1112