Error code

Mitsubishi Electric PFD code 1102

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: refrigerant gas circuit

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Discharge temperature abnormality (Outdoor unit): 1. When 140˚C or more discharge temperature is detected during operations (the first time), outdoor unit stops once, mode is changed to restart mode after 3 minutes, then the outdoor unit restarts. 2. When 140˚C or more temp. is detected again (the second time) within 30 minutes after stop of outdoor unit, emergency stop is observed with code No. “1102” displayed. 3. When 140˚C or more temp. is detected 30 or more minutes after stop of outdoor unit, the stop is regarded as the first time and the

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Gas leak, gas shortage. (2) Overload operations. (3) Poor operations of indoor LEV. (4) Poor operations of OC controller LEV (5) Setting error of connection address. (6) Poor operations of ball valve. (7) Outdoor unit fan block, motor trouble, poor operations of fan controller→Heating (Heating-only, Heating-main). (3) ~ 7) : Rise in discharge temp. by low pressure drawing. (8) Gas leak between low and high pressures. 4-way valve trouble, compressor trouble, solenoid valve SV1 trouble. (9) Poor operations of solenoid valve SV2. 10)Thermistor trouble. 11)Thermistor input circuit trouble on control circuit board.

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.