Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric PCA code PL

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Abnormal refrigerant circuit During Cooling, Dry, or Auto Cooling operation, when the following are regarded as failures when detected one second. a) The compressor continues to run for or more seconds. b) The liquid pipe temperature or the condense/evaporator temperature 75°C or more. * These detected errors will not be cancelled until the power source reset. OF PROBLEMS board • When LED1 on 1 Power supply of door unit. 2 Defective outdoor 3 Power supply of unit. 4 Defective indoor (For the sep

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

(1) Abnormal operation of 4-way valve (2) Disconnection of or leakage in for refrigerant pipes (3) Air into refrigerant piping (30) Abnormal operation (no rotation) 4 of indoor fan · Defective fan motor. is · Defective indoor control board. (5) Defective refrigerant circuit (clogging) is Note: Refer to the manual of controller. Cause indoor controller board is also off. Cause on indoor controller board is also blinking. failure of indoor/outdoor unit connecting is lit. of remote controller wires triple indoor unit system, 2 or more indoor wired together. address for outdoor unit is wrong or not control system, there are some units refrigerant address is 0. vane motor of wire or connection failure of connector vane does not work. is set to fixed position. of wireless remo

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.