Error code
Mitsubishi Electric PAA code E4
No approved translation for this record yet; showing the original text.
Meaning
1. Abnormal if main or sub remote controller can not receive normally any transmission from indoor unit of refrigerant address “0” for three minutes. (Error code: E0) 2. Abnormal if sub remote controller could not receive for any signal for two minutes. (Error code: E0) 3. Abnormal if indoor controller board can not receive normally any data from remote controller board or from other indoor controller board for three minutes. (Error code: E4) 4. Indoor controller board cannot receive any signal
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
ler (2) All remote controllers are set as “sub” remote controller. In this case, E0 is displayed on remote controller, and E4 is displayed at LED (LED 1, LED 2) on the outdoor controller circuit board. (3) Miswiring of remote controller (4) Defective transmitting receiving circuit of remote controller (5) Defective transmitting receiving circuit of indoor controller board of refrigerant address “0” (6) Noise has entered into the transmission wire of remote controller
Solution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/paa/e4