Error code

Mitsubishi Electric klima code UH

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and refrigerant gas circuit

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Current sensor error or input current error • Abnormal if current sensor detects –1.0A to 1.0A during compressor operation. (This error is ignored in the case of test run mode.) • Abnormal if the detected input current or the detected continuous current for 10 second is more than the limit value.

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

Defective outdoor power board DIP switch setting difference of outdoor controller circuit board Disconnection of compressor wiring Defective circuit of current sensor on outdoor power circuit board Decrease of power supply voltage Leakage or shortage of refrigerant

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.