Error code
Mitsubishi Electric klima code 1113
No approved translation for this record yet; showing the original text.
Meaning
Liquid pressure level detection temperature Low sensor abnormality (TH3) (Outdoor unit): since the outdoor unit was stopped, it is treated as the first 1 detection and above is repeated. 5 The unit is in an error stop delay period for 30 minutes after the outdoor unit has been stopped, during which time the error stop delay LED is displayed. Note) 1: Low Pressure Saturation Temperature error is not detected for 3 minutes after the start of compressor operation, during defrosting and for 3 minutes after recovering from defrosting. 2: “1111”, “1112”, or “1113” are also displayed if TH
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberPossible causes
13)Dirty heat exchanger of outdoor unit. 14)Defective indoor fan block, motor, defective fan microcomputer operation, defective operation of solenoid contactor 52F. Note: For12) to 14) there is a drop in low pressure due to a drop in evaporation performance during heating. 15)Defective operation of solenoid valve SV22/32. (Full load operation during unload.) All but model PUHY-400YMF-B. 16)Defective operation of solenoid valve contactor52C2. No. Cannot control low pressure drop with bypass valve (SV4) 18)Defective thermistor. (TH2 ~ TH6) 19)Defective pressure sensor. 20)Defective input circuit for thermistor and pressure sensor on main circuit board. 21)Defective mounting of thermistor (TH2 ~ TH6).
Solution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/mitsubishi-electric/klima/1113