Skip to content
RemFixitSearch fault code

Error code

Mitsubishi Electric klima code 1110

No approved translation for this record yet; showing the original text.

Meaning

9-3. TROUBLESHOOTING Phenomena 1. Remote controller work.: Pipe temperature <Heating mode> When 10 seconds have passed after the compressor starts operation and the hot adjustment mode has finished, the unit is detected as abnormal when condenser/ evaporator pipe temperature is not in heating range within 20 minutes. Note 3: It takes at least 27 minutes to detect abnormality. Note 4: It excludes the period of defrosting (Detection restarts when defrosting mode is over) Heating range : 37.4°F (3°C) ≤ (Condenser/ Evaporator temperature (T63HS)− room tempe

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

circuit board and the outdoor power circuit board Defective communication circuit of outdoor power circuit board Defective communication circuit of outdoor controller circuit board for outdoor power circuit board Slight temperature difference between indoor room temperature and pipe <liquid or condenser/ evaporator> temperature thermistor • Shortage of refrigerant • Disconnected holder of pipe <liquid or condenser/ evaporator> thermistor • Defective refrigerant circuit Converse connection of extension pipe (on plural unit connection) Converse wiring of indoor/ outdoor unit connecting wire (on plural unit connection) Defective detection of indoor room temperature and pipe <condenser/evaporator> temperature thermistor Stop valve is not opened completely. Factor to remote controller. to remote controller, is indicated. not displayed. displayed. the power supply Normal to start up. Self-diagnosis the remote con- ”Please in the case the indoor and communication controller (1) When Check miswiring. (Converse S3 wiring.) (2) When Indoor/outdoor connector is Check board. 30 If refrigerant and LEV Inspect and opening. surface are below until the unit runs.

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.

Remote technician support

Get help from a technician over a video call.

Send a messageVoice callVideo call