Error code
Lincoln Electric All models code LN-8
No approved translation for this record yet; showing the original text.
Meaning
2. On cables with more than one electrode cable, leave the junction between the two or more cables and the single 4/0 stub behind the clamp so only the single electrode lead is under the clamp. 3. Pass the single electrode cable through the holes provided in the back corner of the control section and fasten it to the tab on the conductor above the rear brass block of the wire feeder. LN-8NE AND LN-8SE The extension unit consists of a wire reel mount with a hand crank and either a 22-1/2 or 45 ft (6.9 or 13.7 m) extension cable assembly. The cable is rated at 450 amps, 50% duty cycle. The extension cable can be used for 0.068 through 0.120 in. (1.7 through 3.0 mm) flux-cored electrode and 5/64 through 3/32 in. (2.0 through 2.4 mm) solid electrode. The 22-1/2 ft. (6.9 m) cables can also be used for 1/16 in. (1.6 mm) solid electrodes. To con- nect the cables, perform these steps: 1. When shipped, the hand crank on the wire reel mount is equipped to
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberSolution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/lincolnelectric/tum-modeller/ln8