Error code
JCB All models code S4044
No approved translation for this record yet; showing the original text.
Meaning
Information in this display is constantly updated in real-time. (Some older PCs may experience a slight delay in updating this page, but usually only less than one second.) The left hand side shows the inputs to the ECU, their status indicated by green LEDs. The right hand side shows the outputs from the ECU, their status shown by red LEDs. The exact colour of the LED indicates the status of that feature. A key in the bottom left corner of the main window explains the colours. S404480 The following is a brief explanation of each feature. For further information and examples of typical scenarios please refer to the accompanying Fault Finding Guide accessible via the Help menu. Transmission Speed This is exactly the same signal as explained in the previous section. Gears Inputs: The items on the left show the signal lines connected to the gear selection lever. This lever if the left hand half of the control lever assembly mounted on the steering column. Outputs: The items on the right are the power signals going down to the transmission solenoid valves. The LEDs will indicate which solenoids are being energised. Error detection on the output electrics is continually running. If any o
Member details
Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.
View details as a memberSolution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Remote technician support
Get help from a technician over a video call.
Address of this page: https://www.remfixit.com/tr/jcb/tum-modeller/s4044