Error code

Imperial manifold gauge seti All models code P8-0

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: pressure vessel

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Perishable Mode Heat Test

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

If the container temperature is below 15.6C (60F), the set point is changed to 15.6C, and a 60-minute timer is started. The left display will read “P8-0”. If the container temperature is above 15.6C at the start of the test, then the test proceeds immediately to test P8-1 and the left display will change to “P8-1”. The test fails if the 180-minute timer expires before the control temperature reach- es set point. The display will read “P8-0”, “FAIL”

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.