Error code

Imperial manifold gauge seti All models code P10-2

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: pressure vessel

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Frozen Mode Maintain Temperature Test

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

A fifteen minute timer is started, and the system will attempt to minimize control temperature error (return temperature minus setpoint) until the timer expires. The control temperature will be sampled each minute starting at the beginning of P10-2. During P10-1, the left display will read “P10-2” and the right display will show re- turn air temperature. When the test is completed, the average control temperature error will be com pared to the pass/fail criteria. If the test fails, the control probe temperature will be recorded as -50.0C. Upon failure and when initiated by an automatic Pretrip sequence, P10-2 will auto- repeat by starting P10-0 over again

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.