Heraeus laboratuvar etüvü inkübatör All models error codes
Codes
- E-001Error codeseconds before turning it back on. If the error persists
- E-005Error codeseconds before turning it back on. If the error persists
- E-010Error codecommunication
- E-012Error codeseconds before turning it back on. If the error persists
- E-015Error code(R = 1,000Ω @ 0°C or 1,078Ω @ 20°C). Replace faulty
- E-021Error codeSeparate motor cables and signal cables, otherwise
- E-023Error codeSeparate motor cables and signal cables, otherwise
- E-033Error codemalfunction. Check for blocks in the refrigeration pipes
- E-036Error codecheck resistance (120Ω). Replace brake resistor if faulty
- E-040Error codeimbalance
- E-048Error codeseconds before turning it back on. If the error persists
- E-060Error codeReplace if faulty. Otherwise replace main board
- E-072Error codeseconds before turning it back on. If the error persists
- E-077Error codeseconds before turning it back on. If the error persists
- E-081Error code5 seconds before turning it back on. If the error persists
- E-098Error codef the error persists check anti vibration mounts. Replace
- E-105Error codeseconds before turning it back on. If the error persists
- E-106Error codeseconds before turning it back on. If the error persists
- N300Error codeActual O value < 2 setpoint -2% Gassing with N 2
- N301Error codeActual O value > 2 setpoint +2% Begasung mit N 2
- O2Error codeActual O value < 2 setpoint -2% Gassing with O 2
- V11Error codelit
- X9Error codeopen short
- X14Error codePin 2+3 5 VDC 0 VDC