Error code

h/p/cosmos vakumlu koşu bandı All models code OP48

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Maximum speed during maximum activation of the frequency inverter (applicable for digital RS485 and/or analogue control 0…10 volt of the frequency inverter)

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

The maximum frequency inverter speed is achieved if the MCU (within UserTerminal) sets the control voltage (analogue voltage for frequency inverter) at 10 V. This means maximum frequency of the inverter. The maximum speed during maximum frequency of the inverter is set with the input of the correct device type at option number 03 (OP03) of the administrator options. Option 48 is necessary for manual speed calibration or special speed transformation or drive motors (special speeds) only. When changing OP 48, always pay attention to the correct setting of the OP 05 (maximum speed), OP 11 (speed measurement; Make a note of the voltage in the service repor

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.