Error code

h/p/cosmos vakumlu koşu bandı All models code OP12

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Setting of allowance for speed signal comparison (measurement / control) These values do not reflect the real speed accuracy of the running belt. Accuracy of running belt speed is higher

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

The MCU5 control unit continuously compares the data of the speed measurement with a calculated reference value. In order to detect problems with the speed measurement or speed control or e.g. If the allowance is exceeded, the error message E.31 (measured speed is too high) or E.32 (measured speed is too low) is indicated § indicates: OFF = no comparison 6 = 6 % deviation allowed 8 = 8 % deviation allowed 10 = 10 % deviation allowed

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.