GoodWe All models error codes
Codes
- 00Error codeGFCI Check Timeout
- 01Error codeAC HCT Check Failure
- 2Error codeEEPROM R/W Failure - Memory chip failure
- 02EError codeAFCI Fault
- 3Error codeFac Failure - Grid Frequency exceed the inverter limit
- 04Error codeDCI Consistency Failure
- 06Error codeGFCI Consistency Failure
- 07Error codeRelay Device Failure
- 7Error codeRelay Check Failure - Relay self-checking failure
- 08Error codeAC HCT Failure
- 09Error codeUtility Loss / AC / FAC Failure
- 10Error codeGround I Failure
- 11Error codeDC Bus High
- 12Error codeLCD Communication Failure - Communication error occurs between LCD DSP and the Master DS
- 13Error codeDC Injection High - The DC component of AC current exceed inverter's limit
- 14Error codeIsolation Failure - Insulation Resistance between the ground and the panel is too low
- 14EError codePhase Order Fault
- 15Error codeVac Failure - Grid voltage exceeds the inverter limit
- 16Error codeExternal Fan Failure - External Failure
- 17Error codePV Over Voltage - PV Array voltage exceeds the inverter limit
- 19Error codeOver Temperature - Over temperature on the case
- 20Error codeIFAN Fault - Internal FAN Fault
- 21Error codeDC BUS HIGH - BUS voltage is too high
- 22Error codeGround I Failure - Residual current protection
- 23Error codeUtility Loss - Grid disconnection/fault
- 24Error codeAC HCT Failure - AC current sensor failure
- 24EError codeBus Soft Start Failure
- 25Error codeRelay Check Failure - Relay self-checking failure
- 26Error codeGFCI Failure - Leakage current detection circuit Failure
- 27EError codePhase Angle Failure
- 28EError codeDSP Communication Failure
- 30Error codeREF 1.5V Failure - 1.5V reference voltage exceeds the limit
- 31Error codeAC HCT Failure - AC current sensor failure
- 32Error codeGFCI Failure - Leakage current detection circuit Failure
- Fi4Error codeWi-Fi / LAN iletişimi için
- N/AError codeReference Voltage Check Failure
- ve5Error codeCT ve DRED iletişimi için