Error code

Frigidaire All models code F04

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Washer not advancing (max. time out) or Speed Control problem

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

This type of fault could be temporary or permanent. If this fault occurs, the control will stop the washer and display F04. If the motor is running and the tub fi lled, let the washer run for at least 6 minutes while measuring the voltage between pin 1 of the 8-pin connector(J11) and pin 7 of the 7-pin connector(J6). Constantly monitor the volt meter throughout this 6 minute run time to be certain to observe the voltage change as “timer advance on” is only on for a short time and could be missed when it reverts to the lower voltage reading when timer advance is off

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.