Error code

Frigidaire All models code F03

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Water fi ll/ water level or drain pump problem

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

This type of fault could be temporary or permanent. If this fault occurs, the control will stop the washer and display F03. For the fi ll system, the problem could be the inlet water is turned off. If these check out, the problem could be in the pressure switch or water valve. If the tub fi lls correctly, run the washer in the Drain/Spin cycle to assure the pump operates and pumps out water. Voltage should measure about 120VAC

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.