Error code

Frigidaire All models code E10

No approved translation for this record yet; showing the original text.

Meaning

Fill time too long

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

Possible causes

1. Is the incoming water fl ow normal? Yes, go to step (4). No, go to step (2). 2. Are the incoming water faucets turned on? No, turn water faucets on. Yes, go to step (3). 3. Is the incoming water pressure above (30) psi? No, have customer correct pressure problem. Yes, check for kinked or blocked incoming water hoses, clean incoming water screens. If problem still remains, replace the water inlet valve assembly. 4. Does the fi ll water continue to enter the washer? Yes, go to step (5) no, go to step (6). 5. Remove power from washer. Did the water fi ll stop? Yes, go to step (6). No, replace the inlet valve assembly. 6. For Better models, check the electronic pressure sensor. For Good models, check the pressure switch. Pressure sensor checks good. Go to step (7). Pressure sensor checks incorrect. Replace pressure sensor. 7. Replace the Main Control Board

Solution

Solution steps are available to members and are not shown on this page. Answer the questions to open the solution.

Remote technician support

Get help from a technician over a video call.

Send a message Voice call Video call