Fagor Industrial endüstriyel çamaşır makinesi All models error codes
Codes
- AL-3Error codeNo flame
- AL-4Error codePressure drop failure or insufficient air flow
- AL-5Error codeFan motor overload
- AL-6Error codeOverheating or variator problem
- AL-9Error codeProbe alarm
- AL-11Error codeSprinkler system activated
- C03Error codeIMBALANCE FAULT
- D01Error codeWater intake fault (valve, 3750 ohms or cabling)
- D02Error codeDrain fault (drain pump 155 ohms)
- D03Error codeHeating fault (element 25 ohms)
- D04Error codeTriac motor in short circuit (tacho signal not correct, value to be obtained 90 ohms)
- D05Error codeNTC fault (12 kilohms at ambient temperature)
- D06Error codeMotor fault (reversal) (rotor 1.7-2.3 ohms, stator (1) 1 ohm, stator (2) 1 ohm, Single stator 1.7-2.8 ohms
- D07Error codeDoor lock or motor fault (door lock PTC 4.4 kilohms, door closed 0 ohms and door open infinite value)
- D09Error codeProgramme selector fault
- D13Error codeMotor or electronic circuit fault
- D17Error codeDrum door positioner fault (closure cover in up position 0 ohms, other cover position infinite value)
- D20Error codeWater intake distributor fault (6.5 kilohms)
- D21Error codeElectronic circuit fault
- D28Error codeD29..D30..D31..D32 Electrical disturbance fault
- E2Error codeFAULT IN LOCKING
- E3Error codeDRAINAGE FAILURE / WATER IN TUB
- E5Error codeWATER INLET FAULT
- E6Error codeHEATING FAULT
- E7Error code“MAXIMUM TEMPERATURE REACHED”
- E8Error codeMOVEMENT ERROR
- E12Error codeUNLOCK ERROR
- E23Error codeWEIGHING ERROR
- E25Error codeCONTROL-CONTROL AUX COMMUNICATION ERROR
- E26Error codeMOTOR HOT WIRE ERROR
- E27Error codeNTC OUT OF RANGE ERROR
- E28Error codeERROR PRESSURE SENSOR OUT OF RANGE
- F01Error codeWATER INTAKE FAULT
- F02Error codeDRAINING FAULT
- F04Error codeDOOR LOCK FAULT
- F05Error codeNTC FAULT
- F06Error codeHEATING FAULT
- F07Error codeOVERFLOW / DRAIN PUMP FAULT
- F08Error codeMOTOR FAULT (TACHO GENERATOR)
- F09Error codeMOTOR FAULT: NOT REVERSING
- F10Error codeHOME SYSTEMS FAULT
- F13Error codeFLOW METER FAULT
- F14Error codePRESSURE SENSOR FAULT
- S01Error codeAnti-crease
- S03Error codeSpin-dry 1 (low)
- S05Error codeSpin-dry 3
- S06Error codeSpin-dry 4