Error code

Destron mikroçip okuyucu Because printers vary in their capacity code E-4

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Is the convection fan motor operating when the error code occurs? See “No Convection Motor Operation”. No Yes Is the hall effect sensor (HES) registering a motor speed (Approximately 1500 for high speed and approximately 700 Test HES connection points and for low speed)?* ensure HES wires are installed No Yes on the appropriate terminals of the low voltage relay board. Is there 10 VDC across Confirm 12 VDC to LRB. when the motor is stopped? Yes Replace faulty motor Is there 3-5 VDC across due to failed HES. No the Red-Brown HES wires when the motor is running? Yes If E3 continues to display, contact Alto-Shaam factory Technical Support. *Note: This can be seen in the service remote control. The speeds should closely match

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.