Error code

Delta Ohm anemometre All models code aD0

For your safety

This fault is rated critical. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

If there is a risk to life, first move to a safe place, then call 112. Do not follow remote repair instructions.

Call 112

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

a<Measurements><CR><LF> ⋅ ⋅ ⋅ a<Measurements><CR><LF> where: a = address of the instrument (1 character) <Measurements> = sequence of measured values Commands aD1!, aD2!, etc. are sent only if all the expected values are not received with command aD0!. y y y ⇒ Sequence of measurements in the most complete model: <WS><WD><T><RH><AH><DP><P><R><C> with: <WS> = wind speed <WD> = wind direction in degrees <T> = temperature (sensor Pt100) <RH> = relative humidity in %RH <AH> = absolute humidity in g/m3 <DP> = dew point temperature <P> = barometric pressure <R> = solar radiation in W/m2 <C> = compass angle in degrees Notes: The positive values are always preceded by a + sign to identify the beginning of the measurement value. <DP> measurement has the same format as tem- perature. If a quantity measurement is in error condition, all the digits of the sent value will consist in a series of 9. The fields corresponding to quantities not meas- ured by that particular model are always present. A value consisting in a serie

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

Request for measured values

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.