Error code

DAF All models code 1-0

For your safety

This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.

Hazard area: mains voltage and flammable/explosive material

Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.

The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.

All emergency numbers and province details

No approved translation for this record yet; showing the original text.

Meaning

Fault on starting ACH - EW , no flame detected during startup. The flame sensor value remains below 80 ° C, the voltage at terminals 10 and 12 of the 18-pin connector from the bottom of the electronic control unit below 2.23 V: - Lack or insufficient fuel supply - Insufficient air supply - Clogged exhaust - Dirty or damaged igniter - Too high or too low sparking voltage

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Possible causes

- The cab heater does not start. After two unsuccessful starts, the cab heater turns off and generates a fault code

Solution

Solution steps are not shared for faults that may be dangerous.

No do-it-yourself solution is given for this fault. For your safety, call an authorised service.