Cove All models error codes
Codes
- 0501Error codeNo communication between Main Control Module (MCM) and Motor 1 (MOT1)
- A1Error codeNo water supply detected
- A3Error codeDrainage hose blocked or kinked
- A6Error codeLoose spray arm or excessive foaming
- A7Error codeAuto recovery due to excess foam
- A09Error codeSanitize cycle temperature not reached
- A10Error codeWater supply issue
- A20Error codeExcessive water remaining above the filter plate
- A60Error codeWater temperature error
- E0Error codeWater fill error: The dishwasher is not filling with water within the expected time.Models: DW2450, DW2475Fix: Technician will check water inlet valve, float switch, and water supply line
- E1Error codeWater drain error: The dishwasher is not draining water effectively.Models: DW2450, DW2475Fix: Technician will inspect drain pump, drain hose for obstructions, and air gap
- E2Error codeWater leak detected: The dishwasher has detected a leak and shut off to prevent further damage.Models: DW2450, DW2475Fix: Technician will locate and repair the source of the leak, often involving seals or hoses
- E3Error codeWater temperature error: The water is not reaching the required temperature for washing.Models: DW2450, DW2475Fix: Technician will check the water inlet valve, heating element, and temperature sensor
- E4Error codeDrying system error: The drying function is not operating correctly.Models: DW2450, DW2475Fix: Technician will inspect the drying element, fan, and related sensors
- E5Error codeRinse aid dispenser error: The rinse aid dispenser is not functioning properly.Models: DW2450, DW2475Fix: Technician will check the rinse aid dispenser mechanism for blockages or failure
- E6Error codeMain wash pump error: The pump responsible for circulating wash water is not working.Models: DW2450, DW2475Fix: Technician will diagnose and replace the main wash pump if faulty
- E7Error codeControl panel communication error: The main control board is not communicating with the user interface.Models: DW2450, DW2475Fix: Technician will check wiring harnesses and potentially replace the main control board or user interface
- E8Error codeOverheating error: The dishwasher has detected a temperature exceeding safe operating limits.Models: DW2450, DW2475Fix: Technician will inspect heating element, thermostat, and control board for malfunctions
- E9Error codeDoor latch error: The dishwasher door is not latching securely.Models: DW2450, DW2475Fix: Technician will inspect and replace the door latch assembly if defective
- EAError codeWater level sensor error: The sensor that monitors water level is malfunctioning.Models: DW2450, DW2475Fix: Technician will check the water level sensor and its connections
- EBError codeCirculation pump error: The pump that circulates water during the wash cycle is faulty.Models: DW2450, DW2475Fix: Technician will diagnose and replace the circulation pump
- ECError codeInlet valve failure: The valve controlling water entry into the dishwasher has failed.Models: DW2450, DW2475Fix: Technician will replace the water inlet valve
- EDError codeDrain system blockage: An obstruction is preventing proper drainage.Models: DW2450, DW2475Fix: Technician will clear any blockages in the drain hose, pump, or filter
- EFError codeSensor fault: A general sensor within the dishwasher has failed.Models: DW2450, DW2475Fix: Technician will identify the specific faulty sensor and replace it
- EHError codeHeating system fault: The dishwasher's heating element or related components are not functioning.Models: DW2450, DW2475Fix: Technician will test and replace the heating element or thermostat
- EIError codeMotor fault: The motor for the circulation or drain pump is experiencing issues.Models: DW2450, DW2475Fix: Technician will diagnose the motor issue and replace the relevant pump
- EJError codeCommunication error between modules: Internal electronic components are not communicating.Models: DW2450, DW2475Fix: Technician will check wiring and potentially replace control modules
- EKError codeWater hardness sensor error: The sensor measuring water hardness is faulty.Models: DW2450, DW2475Fix: Technician will check and replace the water hardness sensor if necessary
- ELError codeOver-sudsing detected: Excessive suds are interfering with the wash cycle.Models: DW2450, DW2475Fix: Technician will check detergent dispenser and ensure correct detergent is used; may check pump
- F1Error codeFlood switch activated
- F2Error codeMotor fault
- F3Error codeTemperature sensor issue
- F4Error codeHeating element failure
- F5Error codeInternal lid fault
- F6Error codeComponent failure
- F7Error codeFill valve issue
- F8Error codeElectronics fault - motor controller
- F9Error codeElectronics fault - wash controller
- F30Error codeFlood switch activated
- F40Error codeGeneral electronics error
- F50Error codeElectronics error
- F90Error codeData/electronics error
- FA0Error codePower supply error
- U1Error codeFill fault
- U2Error codeIncorrect loading detected
- U6Error codeSpray arm is loose or has come off