APC NetBotz snmp izleme cihazı All models error codes
Codes
- 0-5Error codeThird-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect a sensor to the cable, follow the instructions provided with the sensor and the instructions provided with the cable
- 8Error codeTemperature/Humidity Senso
- AP9520TError codeA-Link ports Universal sensor ports
- E102Error codeParameter Error
- E103Error codeCommand Line Error
- E107Error codeSerial Lost Communications
- E202Error codeThe current user does not have 'write' privileges
- E204Error codeThe requested operation cannot be completed with the device(s) specified
- E205Error codeSystem error: The requested operation could not be completed
- E206Error codeSystem error: Buffer allocation failed
- mA2Error codeMinimum sensor value
- otz355Error codeDoes not support additional external sensors or camera pods
- otz450Error codeCan host up to: • 2 external sensor pods • 2 camera pods
- otz455Error codeCan host up to: • 2 external sensor pods • 2 Rack Access Pods • 3 camera pods
- otz550Error codeCan host up to: • 12 external sensor pods • 13 Rack Access Pods • 4 camera pods
- RFC951Error code1. Update the BOOTPTAB file (this must be performed by the network administrator; see page 15). When the file is updated, the NetBotz 200 will automatically discover the BOOTP server. 2. Obtain the IP address used in the BOOTPTAB file from your network administrator. OR _________________ 1. Obtain an IP address, subnet mask, and default gateway from your network administrator. See “Important Information about the Default Gateway” on page 15. 2. Do you have access to a computer on the network running Windows® 2000, Windows Server® 2003, or Windows XP? Yes. Run the APC Device IP Configuration Wizard (see page 16). No. Use a local computer connected to the serial port of the Rack Monitor 200 to configure the TCP/IP settings. See “Control Console” on page 18. Or use ARP, Ping, and Telnet (requires network communication experience; see “Use ARP, Ping, and Telnet” on page 17)