Abm endüstriyel dilimleme makinesi All models error codes
Codes
- Bit12Error codeCommunication error
- Bit15Error codeManufacturer-specific error (see IDN 00129)
- F01Error codeDriver has detected the following: • Overcurrent • Overheat • Gate voltage drop
- F02Error codeDC power bus exceeds max. bus voltage
- F03Error codeDC power bus below min. bus voltage
- F07Error codeMain control unit does not recognize the power stage of the driver
- F09Error codeExcessive regen energy being dissipated by the internal or external regeneration resistor
- F15Error codeMotor current exceeds the rating by 120%
- F16Error codeInternal speed loop is saturated and max.torque is applied for more than 3 sec
- F19Error codeResolver feedback error
- F70Error codeMotor is not following the command
- F73Error codeDrive heat-sink temperature rose to over 105° C
- F75Error codeW-phase current exceeds the rating by 120%
- F80Error codeDrive has detected unacceptable errors in the Master Sync Telegrams of the SERCOS Communication
- F81Error codeDrive has detected unacceptable errors in the Master Data telegram
- F86Error codeA request was made to switch to an invalid operation mode