Elitech gaz dolum tartısı All models error codes
Codes
- A1Error codeCompressor run and stop in a proportional time after cabinet sensor failure
- A4Error codeBuzzer alarm output switch
- A5Error codeCabinet temperature lower limit alarm value
- A6Error codeCabinet temperature upper limit alarm value
- A7Error codeCabinet over temperature alarm time delay
- A8Error codeThe initial cabinet over temperature alarm time delay after electrified
- A9Error codeOver temperature alarm upper deviation
- A10Error codeOver temperature alarm lower deviation
- A11Error codeOver temperature alarm mode
- A12Error codeLight/Alarm relay selection
- C5Error code-58℉～temperature set value
- C6Error codetemperature set value～185 ℉
- cd1Error codeCondenser sensor selection
- cd2Error codeCondenser high temperature alarm start value
- cd3Error code
- d9Error codeCabinet temperature display time delay after defrost
- do1Error codeControl output of door switch
- E1Error codeCabinet temperature sensor failure
- E2Error codeEvaporator sensor failure
- E3Error codeCondenser sensor failure
- F1Error codeFan running mode
- F2Error codeFan initial start time delay after electrified
- F3Error codeFan start time delay after defrost
- F4Error codeFan working lowest temp
- F5Error codeFan working highest temp