Dwyer All models error codes
Codes
- 2-1Error code25 kHz Sensor, Polypropylene, Standard Range, 2 ˝ NPT Connection, 50 ft (15 m) Cable
- F6Error codeWater, Oils, Chemicals Water, Oils, Chemicals Water, Oils, Chemicals Corrosives Water, Oils, Chemicals High temp/pressure, corrosive, Expl
- F7Error codeGeneral purpose High temp/pressure, corrosives Corrosives Broad chemical compatibility Broad chemical compatibility Broad chemical compatibility Oils & Fuels Food/beverage, corrosives General purpose Oils & water, general purpose High viscosity liquids Water-based liquids, complies with FDA Chemical & plating Viscous, sticky or corrosive liquids Oils, water & chemicals
- for30Error codeSPECIFICATIONS Pressure Limit: See model chart. Service: Compatible liquids. Mounting Orientation: Vertically in Wetted Materials: See model chart. either vertical or horizontal tanks. Temperature Limits: 40 to 140°F (4.4 Indication Markings: 1/16 in or 1 mm to 60°C). increments
- in3Error codeSPECIFICATIONS Temperature Limit: 212°F (100°C). Noise Level Range: 60 to 75 dBA. Supply Pressure: 43.5 to 87 psi (3 to 6 bar). Air Consumption: See model chart. Air Connection: 1/4˝ BSPT female with 1/4˝ OD push to connect adapter on IPV-1, PV-2 and IPV-3; 3/8˝ BSPT female with 3/8˝ OD push to connect adapter on IPV-4. Also includes muffler for exhaust port. How It Operates The IPV series air hammer contains a powerful magnet inside the hammer. The hammer and magnet are tightly closed before activation. As the inlet air pressure gets higher than the force, this tightens the hammer and magnet. The hammer and magnet will separate and cause more strength for impact power. The spring will bring he hammer back to the initial position automatically after the impact. By doing this, he air pressure will be released and the strength of the air pressure will be delivered o the target impact container. It will help to smooth the flow and prevent accumulation nside the container