Delta Electronics sürücü All models error codes
Codes
- 0-00Error codeIdentity Code of the AC Motor Drive
- 00-00Error code
- 00-01Error codeDisplay AC Motor Drive Rated Current
- 0-01Error codeRated Current Display of the AC Motor Drive
- 00-03Error codeStart-up Display Selection
- 00-04Error codeContent of Multi-function Display
- 00-09Error code0: V/f Control 1: V/f Control + Encoder (VFPG) 2: Sensorless vector control (SVC) 3: FOC vector control + Encoder (FOCPG) 4: Torque control + Encoder (TQCPG) 8: FOC PM control (FOCPM)
- 00-14Error code1: RS-485 serial communication or digital keypad (KPc-CC01) 2: External analog input (Pr. 03-00) 3: Digital terminals input (Pr. 04-00~04-15) 4：Direct docking mode only ◆
- 00-15Error code1: External terminals 2: RS-485 serial communication or digital keypad (KPC-CC01)
- 01-01Error code1st Output Frequency Setting 1 (base frequency / motor’s rated frequency)
- 01-02Error code1st Output Voltage Setting 1 (base voltage/ motor’s rated voltage)
- 01-04Error code2nd Output Voltage Setting 1
- 01-06Error code3rd Output Voltage Setting 1
- 01-08Error code4th Output Voltage Setting 1
- 02-08Error code28: Emergency stop (EF1) (Motor coasts to stop)
- 02-16Error code10: User-defined Low-voltage Detection (LV)
- 02-34Error code0.00~+-400.00Hz (it is motor speed when using with PG)
- 03-00Error codeExternal analog terminals Pr.03-00~02 7: positive torque limit 10: positive/negative torque limit Pr.07-24 Forward motor torque limit Quadrant I
- 03-06Error codePositive/negative Bias Mode (AUI1)
- 03-17Error code2: Motor speed (RPM)
- 03-19Error codeAnalog Output Value in REV Direction 1
- 03-20Error code2: Motor speed (RPM)
- 03-22Error codeAnalog Output Value in REV Direction 2
- 05-00Error codeMotor Auto Tuning
- 05-01Error codeFull-load Current of Motor
- 05-02Error codeRated power of Motor
- 05-03Error codeRated speed of Motor (rpm)
- 05-04Error codeNumber of Motor Poles
- 05-05Error codeNo-load Current of Motor
- 05-16Error codeOver Slip Treatment
- 05-18Error codeAccumulative Motor Operation Time (Min.)
- 05-19Error codeAccumulative Motor Operation Time (day)
- 06-00Error codeLow Voltage Level
- 06-01Error codePhase-loss protection
- 06-02Error codeOver-Current Stall Prevention during Acceleration
- 06-03Error codeOver-current Stall Prevention during Operation
- 06-04Error codeAccel. / Decel. Time Selection of Stall Prevention at constant speed
- 06-06Error codeOver-torque Detection Level (OT1)
- 06-09Error codeOver-torque Detection Level (OT2)
- 06-11Error codeCurrent Limit
- 06-12Error codeElectronic Thermal Relay Selection
- 06-16Error codePresent Fault Record
- 06-17Error codeSecond Most Recent Fault Record
- 06-18Error codeThird Most Recent Fault Record
- 06-19Error codeFourth Most Recent Fault Record
- 06-20Error codeFifth Most Recent Fault Record
- 06-21Error codeSixth Most Recent Fault Record
- 06-22Error code0~65535 (refer to bit table for fault code)
- 06-23Error code0~65535 (refer to bit table for fault code)
- 06-24Error code0~65535 (refer to bit table for fault code)