Canon fotokopi All models error codes
Codes
- A1Error codeCOUNTER A: Waste ink absorber Count (dot count mL) D1: CR bearing Count (reading ×210 mm) D2: Encoder sensor Count (Total ink discharge rate in multiples of one million dots) D3: Carriage height changing cam Count (rotation count) F1: Ink supply system (tube, flexible cable) Count (CR scan count) H1: Purge unit Count (controller cam rotation count) K1: Non-discharge unit Count (non-discharge operation count) M1: CR motor Count (CR drive time h)
- C1Error codeIf none of the above apply, check error logs
- C2Error codeFaulty carriage idler pulley (broken spring hook, dropped belt teeth)
- C3Error codeIf the error occurs before the start of printing, the main controller is most likely faulty
- C4Error codeheck the carriage stop position. If the carriage is at the leftmost position, th it may be faulty (check the lock pin)
- HW-1Error codeFaulty main controller
- iPF700Error codelace the carriage PCB
- J6Error codeFaulty main controller (cutter driver PCB)